Знання

Ця сторінка доступна тільки для перегляду. Ви можете продивитися вихідний текст, але не можете змінювати його. Якщо ви вважаєте, що це не вірно, зверніться до адміністратора.
====== Налаштування nftables ======
===== Конфіг =====
Створити конфіг ///etc/nftables.conf//:
<file text /etc/nftables.conf>
#!/usr/sbin/nft -f

# Hook order is: ingress -> prerouting -> input/output/forward -> postrouting
# see also https://xdeb.org/post/2019/setting-up-a-server-firewall-with-nftables-that-support-wireguard-vpn/

# Start by flushing all the rules.
flush ruleset

# Define variables
define ext_if = eno1
define lo_if = lo
define home_ip = 80.80.80.80
define vps_ip = 81.81.81.81

# include all files in a given directory using an absolute path
#include "/etc/nftables/*"

# Setting up a table, simple firewalls will only need one table but there can be multiple.
# The "inet" say that this table will handle both ipv4 (ip) and ipv6 (ip6).
# The name is "firewall" you can name it anything you like.
table inet firewall {
    set tcp_accepted {
        comment "Grant TCP access to these ports"
        type inet_service;
        elements = { http, https, smtp, submission }
    }

    set udp_accepted {
        comment "Grant UDP access to these ports"
        type inet_service;
        elements = { ntp }
    }

    set trusted_ips {
        comment "Grant all access from these IPs"
        type ipv4_addr
        flags interval
        elements = { $home_ip, $vps_ip }
    }

    set blocked_ips {
        comment "Deny access from these IPs"
        type ipv4_addr
        flags interval,timeout
    }

    counter cnt_ssh_blocked {
    }

    chain ssh {
        limit rate over 3/minute counter name cnt_ssh_blocked log prefix "[nftables] ssh connection limit exceeded: " drop
        accept
    }

    chain input {
        # This line set what traffic the chain will handle, the priority and default policy.
        # The priority comes in when you in another table have a chain set to "hook input" and want to specify in what order they should run.
        # Use a semicolon to separate multiple commands on one row.
        type filter hook input priority 0; policy drop;

        # Drop invalid packets.
        ct state invalid drop

        # Drop none SYN packets.
        tcp flags & (fin|syn|rst|ack) != syn ct state new counter drop

        # Limit ping requests.
        ip protocol icmp icmp type echo-request limit rate over 1/second burst 5 packets drop
        ip6 nexthdr icmpv6 icmpv6 type echo-request limit rate over 1/second burst 5 packets drop

        # Allow from specific ips
        iifname $ext_if ip saddr @trusted_ips accept

        # Deny from specific IPs
        iifname $ext_if ip saddr @blocked_ips drop

        # !!! Rules with "limit" need to be put before rules accepting "established" connections.
        # Allow all incoming established and related traffic.
        ct state established,related accept

        # Allow loopback.
        # Interfaces can by set with "iif" or "iifname" (oif/oifname). If the interface can come and go use "iifname", otherwise use "iif" since it performs better.
        iif $lo_if accept

        # With these allowed you are a good network citizen.
        ip protocol icmp icmp type { destination-unreachable, echo-reply, echo-request, source-quench, time-exceeded } accept

        # Without the nd-* ones ipv6 will not work.
        ip6 nexthdr icmpv6 icmpv6 type { destination-unreachable, echo-reply, echo-request, nd-neighbor-solicit,  nd-router-advert, nd-neighbor-advert, packet-too-big, parameter-problem, time-exceeded } accept

        # Allow needed tcp and udp ports.
        iifname $ext_if tcp dport ssh ct state new jump ssh
        iifname $ext_if tcp dport @tcp_accepted ct state new accept
        iifname $ext_if udp dport @udp_accepted ct state new accept
    }

    chain forward {
        type filter hook forward priority 0; policy drop;

        # Drop invalid packets.
        ct state invalid drop

        # Deny from specific IPs
        ip saddr @blocked_ips drop

        # Forward all established and related traffic.
        ct state established,related accept
    }

    chain output {
        type filter hook output priority 0; policy accept;

        # Deny from specific IPs
        ip daddr @blocked_ips drop
    }
}
</file>

===== Перевірити, чи запускається nftables автоматом =====
  sudo systemctl is-enabled nftables
  
===== Перезапустити =====
  sudo systemctl reload nftables
Цей релоад перевірить коректність правил і видасть помилку, якщо конфіг невалідний

===== Посилання =====
[[https://hastur.tiaro.xyz/doku.php?id=software:os:linux:nftables|Nftables]]
Знання

Користувальницькькі налаштування

Налаштування сайту

Налаштування сторінки
